CARPENTRY 3D Making the carpentry went relatively well, the biggest challenge was that most of the windows had a different size. The part of the carpentry we made was windows, doors and railings. In the house there are several types of windows, the most common ones were the single and double ones. The difference between these two is that with the double window the glasses need to be put in a way so that it is possible to open the window. so what you would see in the section of the window is that the two glasses are put on each side of the middle axis. To make the different windows we started drawing squares an use the command "presspull". To get the frames we used the command "shell". The thickness of the frames that we used was 5 cm. For making the doors we used the same commands as for the windows. We added a door handle to complete the door. We started making the railings of the staircase in the house. We made it solid like the walls of...
