Information about Casa Oks


Antonio Bonet was a Catalan architect, designer and urban planner. Apart from Oks house he is also known for designing La Ricarda and the butterfly chair. 

 The Oks house is located in the town of Martinez, in the outskirts of Buenos Aires. It has two floors, and a basement. From the main façade shrubs are connecting a path to the streets. The area of the house has a fence with a low grind. The house has a kind of patio coming from one of the facades.  A 70-centimeter high platform defines the perimeter and lower floor of the house. The inside of the house floats freely, and is illuminated by the big windows covering the wall. The house is structured with columns bearing the loads. This allowed big windows and open spaces inside the house. 
(Source + pictures taken from http://www.hiddenarchitecture.net/2017/04/oks-house.html )

Comments

Post a Comment

Popular posts from this blog

Vertical Garden: Renders

Image
Renders  Revit In Revit we used in-place masses. We needed the vertical garden and the kitchen frame with a small kitchenette. To create vertical garden we made several boxes placed on top of each other in a pattern. To make one of these boxes we used in place mass from massing and site in the tools bar. We first created a box, and then a sequence of void inside of it. Then we used voids to make the subtractions for the gaps. We put the box repeatedly in a vertical pattern. For the kitchen frame we used the same technique. Then we added materiality to it. Sine last Revit delivery we changed the dimensions of the kitchen frame and added some extra vertical boxes for the plants that will be used for cooking in the kitchen. We created our own material by adding a picture of the specific wood type we want in the material browser.  Figure 1: material browser Renders The first set of renders were not successful. We sent them to the cloud and they did not pick up the sett...
Read more
Image
Easter practice I had some problems with my Easter practice, because the project was first deleted from my computer, so I had to redo it.. The geometric shapes were difficult to make. I used boxes, in order to do the main shape, I made two different geometric shapes and used "intersect" to make a union. I used the command "revolve" for the circular stairs. 1. To start you have to drew the section of the stairs. For circular stairs you have to extrude them witn using the command "revolve". For the squared stairs I used normal extrude, and to create the corners I used the command "union". 2. Then I started drawing the supports of the shape V. I had to do a cube and draw two different sections to create two geometrical shapes and put them together. To finish I used "union". I used polar array to copy them around an axis. 3. To make the structure of the structure I used the same technique as in step 2. 4. The parts between the st...
Read more

Presentation, book and families

Image
Since I already wrote about presentation sheets in my last blog post I will only write about families and color schemes in this post. Families Figure 1 - reference planes The planes of reference are those that delimit us the drawing and help us to place the different elements of the family. The two planes that define origin form the point of insertion of the family. It is important that the planes of origin be anchored so that they do not move. Reference planes can be dimensioned and parameterized to control the distances between them. The dimensions create parameters to previously decide the distances of the objects linked to the planes. Figure 2 - parameter When designing a family the start point is to create reference planes. These reference planes helps us placing the elements we are going to draw. The intersection of two planes will create an origin where you can easily anchor an element. What is great about Revit you can control the distance...
Read more